-40%
(4) 5x114.3 Wheel Spacers Hubcentric 20mm Thick 67.1mm Hub 12x1.5 Stud
(4) 5x114.3 Wheel Spacers Hubcentric 20mm Thick 67.1mm Hub 12x1.5 Stud
(4) 5x114.3 Wheel Spacers Hubcentric 20mm Thick 67.1mm Hub 12x1.5 Stud
(4) 5x114.3 Wheel Spacers Hubcentric 20mm Thick 67.1mm Hub 12x1.5 Stud
(4) 5x114.3 Wheel Spacers Hubcentric 20mm Thick 67.1mm Hub 12x1.5 Stud
(4) 5x114.3 Wheel Spacers Hubcentric 20mm Thick 67.1mm Hub 12x1.5 Stud
(4) 5x114.3 Wheel Spacers Hubcentric 20mm Thick 67.1mm Hub 12x1.5 Stud
(4) 5x114.3 Wheel Spacers Hubcentric 20mm Thick 67.1mm Hub 12x1.5 Stud
(4) 5x114.3 Wheel Spacers Hubcentric 20mm Thick 67.1mm Hub 12x1.5 Stud
(4) 5x114.3 Wheel Spacers Hubcentric 20mm Thick 67.1mm Hub 12x1.5 Stud

(4) 5x114.3 Wheel Spacers Hubcentric 20mm Thick 67.1mm Hub 12x1.5 Stud

$ 41.67

  • Bolt Pattern: 5x114.3 or 5x4.5
  • Brand: Promotive Racing
  • Center Bore Size: 67.1mm
  • Finish: Anodized Silver
  • Hub Bore: 67.1mm
  • Installation Note: Direct Bolt On -Modifying OE Studs May Be Required
  • Interchange Part Number: For Hyundai Volester Santa Fe Mazda 3 5 6 RX7 Kia Soul Forte
  • Manufacturer: Promotive Racing
  • Manufacturer Part Number: LOGS20B-X2-PMR
  • Material: High Grade T6 Aluminum w/ Class 10.9 Carbon steel wheel studs
  • Number in Pack: Wheel Spacers & Nuts
  • Other Part Number: For Evo 8 9 10 Eclipse 3000GT Miata Escape RX8 Patriot Fusion
  • Performance Part: Yes
  • Placement on Vehicle: Front Axle, Rear Axle
  • Spacer Thickness: 20mm (About 13/16")
  • Spacer Type: Hub Centric with Wheel Centric Lip
  • Thread Size: 12mm x 1.5
  • Type: Wheel Spacer
  • Vehicle Bolt Pattern:: 5x4.5" (5x114.3)
  • Warranty: 12-Month
  • Wheel Bolt Pattern:: 5x4.5" (5x114.3)

Description

Spacer Thickness: 20mm each side Quantity: 4 Pieces Bolt Pattern: 5x114.3 to 5x114.3 (Equivalent to 5x4.5" inch) Center Bore: 67.1mm Thread Pitch: 12x1.5 Spacer Type: Hub Centric w/Hub Lip This spacer set features open-end lug nuts designed to attach the spacers to your stock hubs.. Your Factory wheel studs may extend past the surface of the wheel spacers. In this case you will need to: 1. Reduce the length of the factory studs. 2. Ensure the wheels have open spaces (cavities) between the bolt holes. 3. Obtain shorter studs and replace the existing factory studs with them.